Glock Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
88 Posts
That connector was the only part I had replaced in that pistol. That's all the customer wanted changed. You have to make sure the angle is just right or it won't give you the proper "connection". I dropped it in, took it out back, and blamo! Full auto. All it takes is a little manipulation of the connector to make it full auto but then you'll have the BATFE knocking on your door and you don't want that. I have heard from other armorers the inconsitencies with Ghost connectors. This is why I use LWD connectors and Wolff springs.
Being that you are a gunsmith you should have told them that ghost recomends changing all the springs with their connecters.I installed the ghost rocket and did not install the recomended wolf striker spring.Trigger pull was not consistant. I changed the springs as recomended it made one hell of a difference!Ghost is a fine product and they stand behind it just as LWD does!LWD or Ghost you cant go wrong unless you don't follow recomended instructions!
 

· Registered
Joined
·
88 Posts
LWD 3.5 lb connector. Don't use the Ghost connectors. Use the Lone Wolf connectors. Trust me on this one.
I used the Ghost rocket connecter and the recomended springs. And I have a great trigger pull no problems!What problems did you have? I also have no overtravel on the trigger.I had to trim it a few times with a dremel to get the pull correct.Other than that it was a breeze to install.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top