Glock Forum banner
Cancel

What have you bought related to guns.?

194597 Views 4985 Replies 235 Participants Last post by  Greywood, 
glockin9
3
I bought some,.40 Cal.,.38 spl,.380,&.44 spl. ammo,and some rifle magazines the last week.

Attachments

See less See more
Reply
Save
Like
  • Like
Reactions: 4
1 - 20 of 4986 Posts
3404speed
2
My new multi holsters kydex holster came in for my 43x. Had one for my 43 and my 43x fit in it but the 43x fits in this one a tad better. Also i had just the plain finish for my 43 but couldnt resist the carbon fiber print. Plus its a little smoother than their standard finish which will cut down on chaffing.

Deep concealment. Full sweat shield and fbi cant. Carry at about 10 oclock.

Furniture Wood Rectangle Chair Table



Handgun holster Everyday carry Strap Luggage and bags Personal protective equipment
See less See more
Reply
Save
Like
  • Like
Reactions: 3
3404speed
Went to my lgs and to their range today. After some range time i went upstairs to browse their shop. There were about two or three people buying guns, but i stumbled upon this gun cleaning mat. They only had two left. My dads birthday is monday so i picked one up for him

Wheel Tire Bird Vehicle Flag
See less See more
Reply
Save
Like
  • Like
Reactions: 5
3404speed
2
Finally got my leupold FX-II 2.5x28 Scout scope mounted on my gunsite scout. I got the reticle fairly straight and the scope positioned where i want it. Still need to do a final leveling and then torque the ring screws. I know im gonna catch flac for the bipod lol

Machine gun Air gun Trigger Gun barrel Recreation


i think i got my eye relief set pretty good.


Do you think the eye piece is too close to the ejection port on the reciever?

Automotive tire Bumper Automotive lighting Automotive exterior Automotive design
See less See more
Reply
Save
Like
  • Like
Reactions: 5
3404speed
mtelep said:
Very nice rifle!!!! What caliber is it??
Click to expand...
.308 Still havent shot it yet. Probably wont get to for awhile until the state ranges open back up
Reply
Save
Like
  • Like
Reactions: 1
3404speed
4
Got a magpul sling swivel mount bipod for my gunsite scout. I thought i had a harris on there but when i looked the part number up its a cheapy $40 bipod. The magpul looks right at home and is much sleeker

Wood Reed instrument Air gun Sports equipment Wind instrument


Machine gun Air gun Trigger Shotgun Wood


Machine gun Air gun Wood Trigger Shotgun


Brown Amber Tints and shades Silver Parallel


now i just need to ditch the rubber scope cover and pick up a set of the leupold covers but boy are they pricey
See less See more
Reply
Save
Like
  • Like
Reactions: 2
3404speed
My order from bass pro shipped yesterday after about 15 days on order. 500 rds of federal .223 for $177 shipped.
Reply
Save
Like
3404speed
Gun_Aficionado said:
My 1k of 7.62x39 and 1k of .223 arrived in the mail today. Very happy!
Click to expand...
i got 500 rds of .223 in the mail today as well.

Brown Colorfulness Amber Tints and shades Beige
See less See more
Reply
Save
Like
  • Like
Reactions: 5
3404speed
Got some more 223 in today. stockpile is increasing

Drink Font Machine Audio equipment Musical instrument accessory
See less See more
Reply
Save
Like
  • Like
Reactions: 5
3404speed
mattm said:
Nice, but dang, price on 5.56/.223 went up a bunch as of late.
PMC is decent though. I have a bit of their .308.
Click to expand...
cost about 40 cent a round with shipping. Between the 1500 rds i now have im into them for about 38 cent a round
Reply
Save
Like
  • Like
Reactions: 1
3404speed
3
Finally got my leupold quick flip scope covers in for the leupold scout scope on my gunsite scout. Normally about $65 a piece. Found one on ebay for $40 and the other for $55.




See less See more
Reply
Save
Like
  • Like
Reactions: 2
3404speed
2
Picked up some slate black industries m lok covers/grips to replace the magpul rubber ones. I looked at rail scales but too expensive and the ones they make in fde only cover 2.5 m lok slots. I had to have ones that fit 2 slots to work with my setup. The magpul rubber ones were ok but the oil from your hands made them kind of sticky. Plus im sure these will hold up to heat better.

Air gun Trigger Machine gun Gun barrel Gun accessory


Air gun Trigger Machine gun Gun barrel Gas
See less See more
Reply
Save
Like
  • Like
Reactions: 1
3404speed
Olga17 said:
Outbags holster came in today.
Not too shabby and break in period will be short!
Price was right too.
View attachment 213591
Click to expand...
just be careful with how it conforms to the trigger
Reply
Save
Like
  • Like
Reactions: 1
3404speed
Danzig said:
Got my slide internals today. Just looking for a barrel at the moment. Best deal I’ve seen yet is Lone Wolf. View attachment 213593
Feel free to give recommendations for a good deal on a gen5 34 barrel.;)
Click to expand...
that looks like a pretty good price, i always thought it was crazy on how you could spend as much on a barrel as you could a whole pistol lol
Reply
Save
Like
  • Like
Reactions: 1
3404speed
Danzig said:
My buddy sent me a link for a Zev barrel. Close to $300 and a 90 day wait!
Click to expand...
Whats the main reason for using a aftermarket barrel?
Reply
Save
Like
3404speed
Olga17 said:
No worries, conforms very well to the pistol.
Seeing the quality I may get an OWB for a different pistol.
Click to expand...
i know that i mean just be aware of it indenting in front of the trigger, could cause a mishap
Reply
Save
Like
  • Like
Reactions: 1
3404speed
Danzig said:
I bought a 34 slide for my Glock 17 gen5. Just building it.
Looking for best deal.
Click to expand...
i know i mean are there any advantages over a stock barrel?
Reply
Save
Like
  • Like
Reactions: 2
3404speed
6
Ok so i couldnt resist. Bought a new US m7 bayonet made by ontario. Figured since my m&p 15 has a bayonet lug i might as well have one for it. Took the plastic handles off and wrapped it with paracord. Think it came out great and for under $50 counting the cost of the paracord its not bad at all, hope i never need to use it lol.

Wood Sword Blade Cylinder Metal




Brown Parallel Thumb Output device Wrist




Tire Wheel Automotive tire Bicycle part Tool




Machine gun Air gun Trigger Shotgun Gun barrel




Air gun Trigger Machine gun Gun barrel Gun accessory




Air gun Trigger Machine gun Gun barrel Gun accessory
See less See more
Reply
Save
Like
  • Like
Reactions: 4
3404speed
Danzig said:
Blinging out the gen5.
https://wickedgrips.com/product-category/glock/parts-for-glock-pistols/
View attachment 215451 View attachment 215453
Click to expand...

Have you thought about color filling the eyes insert black. Would make it pop for sure, looks badass either way
Reply
Save
Like
  • Like
Reactions: 4
3404speed
Should be able to still find hornady critical defense for about a dollar a round
Reply
Save
Like
3404speed
NWG40 said:
Usually wolf is pretty good ammo when you can get it.
Click to expand...
i shot tighter groupings out of my new .308 ruger with the wolf military classic rounds than with the hornady black. Of course the first 20 were hornady and then shot 60 of the wolf so maybe the barrel was seasoned by then lol
Reply
Save
Like
1 - 20 of 4986 Posts
Glock Forum
A forum community dedicated to glock owners and enthusiasts. Come join the discussion about optics, holsters, gunsmithing, styles, reviews, accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
Glock Forum General Firearm Forum Introductions Ammo & Reloading Glock Accessories & Gear

Top Contributors this Month

View All
Danzig
Old Bloke
RIP
Recommended Communities
Community avatar for Glock Gun Forum
Glock Gun Forum
270K+ members
Community avatar for Defensive Carry
Defensive Carry
123K+ members
Community avatar for Cooking
Cooking
NEW!
60+ members
Top