Trigger change pull change on a 34

Discussion in 'GSSF / IDPA / Competition' started by Shooter4265, Feb 25, 2012.

  1. Shooter4265

    Shooter4265 New Member

    4
    0
    Just changed out the standard 5.5 lb. trigger pull to 4 lb. on a GSSF issue 34. Using the instructions for the 25 cent trigger job site (http://www.alpharubicon.com/mrpoyz/glock/). I used a Wolff Springs competition tigger pack, with shipping $15 direct from Wolff. Beware, it took almost 2 weeks to receive. The job was much easier that I thought it would be, requiring swapping out 3 springs. What a difference! Smooth trigger pulls with enough weight that I feel comfortable using it in IDPA.
     
  2. SHOOTER13

    SHOOTER13 RETIRED MODERATOR Sponsor Lifetime Supporting Member

    Sounds good...congrats !
     

  3. Nice. I have a 3.5 in my 23. I just bought a 34 today and have only shot 100 rounds through it. Not sure if I'll do anything.
     
  4. jrco36

    jrco36 New Member

    12
    0
    I have glockworkx 2.0 in my G17 and 3.5 in my 23 and all work perfectly
     
  5. 40caljim

    40caljim Active Member Supporter

    I also have the GlockWorx 2lb connector in my G-35 open gun, and the 3.5 lb trigger out of my G-35 went into my G-23.
     
  6. qoholeth

    qoholeth New Member

    20
    0
    I had trouble with S&B ammo dented primers no bang. I reverted to factory striker spring and all is well, a little more trigger weight but 100% ignitions with S&B.
     
  7. ash1012

    ash1012 New Member

    3,740
    2
    I sent my G-35 away to get a performance package done. And the wait begins
     
  8. Argyle64

    Argyle64 New Member

    I loved my trigger job on my G34. Smooth shooting and accurate pistol.