Glock Forum banner
801 - 820 of 862 Posts

·
Premium Member
Joined
·
8,513 Posts
Night Fision Blade Heights Available

There is so much to talk about with our new offerings in the Optics Ready Stealth Series! In this email we'll focus on what's new for Glock pistols.
NEW UPGRADES
On all our new ORS sights, our serrations are finer to keep from accumulating dust, fuzzies and whatever else gets stuck in there when you carry your gun daily. The finer serrations also produce less glare and cast less shadow when a hand-held light is used.
We also have added more bevels to the edges of our sight bodies to ensure we don't chew up your favorite t-shirt (which is definitely our Night Fision one).
NEW OPTIONS: FULL SIZE GLOCKS
It's our job to ensure you get the highest quality product we can offer, and with all the incredible options for optics out there, with just one blade height, we just weren't doing that. The two new blade heights have been designed to give you more options to achieve that lower 1/3 co-witness with a larger variety of optics and plates.
NEW OPTIONS: SLIMLINE GLOCKS
Summer is coming—and so is the season of smaller conceal carry guns! If you're looking to ensure you have back up irons to pair with the Trijicon RMRcc, Night Fision has your back. We know the 43x MOS and RMRcc is a popular off-duty combination, but with our original blade height there was no hope for a co-witness.
Rather than leave you to end up with sub-par sights, we designed our new .465-.472 blade height for your needs. The Glock 48 MOS got it's own specific blade height for the same taller mount optic, with the .465-.488
WANT EVEN MORE DETAIL?
Check out our blog post where we dig into the details on what these new blade heights can now offer you!
Brands


 

·
Premium Member
Joined
·
6,734 Posts

·
Premium Member
Joined
·
6,734 Posts
Nice! Will it dethroned the Glock 20 and Glock 40?
I don`t see that happening. But competition is always good. I`m sure Glock will be watching though.
My G29.4 has actually been my most trouble free, most accurate 10mm of all the 10mm`s that i own.
 

·
Premium Member
Joined
·
8,513 Posts
RUAG Voluntary 9mm Ammo Recall

RUAG Ammotec USA, Inc., the owner of the Geco and Norma brands of ammo, has issued a voluntary recall of several lots of 9mm ammo. If you have recently purchased 9mm ammo from either the Geco or Norma brands, please see the notice below to determine if you are impacted.
WARNING: IMPORTANT RECALL NOTICE REGARDING CERTAIN 9MM AMMUNITION
RUAG Ammotec USA, Inc. is issuing a voluntary recall of specific SKUs/articles and corresponding Lot numbers of 9mm ammunition identified below, due to possible performance inconsistencies in a small percentage of the ammunition.
DANGER: STOP USING YOUR 9MM AMMUNITION IMMEDIATELY UNTIL IT HAS BEEN DETERMINED WHETHER YOUR AMMUNITION FALLS WITHIN THE BELOW SKU/ARTICLE/LOT NUMBER LIST.
FAILURE TO FOLLOW THIS INSTRUCTION COULD RESULT IN DAMAGE TO YOUR FIREARM AND/OR INJURY
POTENTIALLY AFFECTED SKU/LOT NUMBERS
  • GECO 202200025 – Lot No: SAV22D0052, SAV22D0053, SAV22D0054, SAV22D0055, SAVD0056, SAVD0057, SAVD0058, SAVD0059, SAVD0060
  • GECO 202200020 – Lot No: SAV22D0085, SAV22D0086
  • Norma 911550050 – Lot No: SAV22C0024, SAV22C0025
  • Norma 912450050 – Lot No: SAV22C0037, SAV22C0038, SAV22C0039, SAV22C0040, SAV22C0041
  • GECO 270840050 – Lot No: SAV22C0030, SAV22C0033
DESCRIPTION OF ISSUE
Through its quality control efforts, RUAG has identified possible crimping irregularities in a small number of rounds within the ammunition SKUs/Lots identified above that could allow the projectile to be seated further into the casing than intended. Continued use of the potentially affected ammunition could impact safe firearm performance leading to property damage and/or injury.
This issue could affect a small percentage of ammunition within the SKUs/Lots identified in the chart above.If you are uncertain as to whether your ammunition falls with the potentially impacted SKU/Lot numbers, or if you have any additional questions concerning this notification or need assistance with these instructions, please contact a RUAG Customer Service Representative by email: [email protected] or phone: (912) 342-2272. For more information about this notice, you call also visit Ammoshoponline.com

HOW TO DETERMINE THE SKU/LOT NUMBER FOR YOUR AMMUNITION
The SKU and/or Lot number for your ammunition is located on the packaging as follows:

Image from press release
WHAT TO DO IF YOUR AMMUNITION IS AFFECTED
Once you have determined, based on its SKU/Article/Lot number, that your ammunition is one of the affected products, please sumit [sic] a return request by email:[email protected] or by phone: (912)342-2272 to receive pre-paid shipping label. Once your ammunition is returned, we will refund your full purchase price for the subject ammunition through your original payment method and provide a discount code for 20% off your next purchase at Ammoshoponline.com (“Discount Code”). The Discount Code is valid until July 31, 2022.
Nobody wants their gun to go kaboom when they expected a bang. If you, like me, are impacted by this recall notice, I strongly suggest reaching out to the contact information above. You get a full refund and a 20% off coupon, which is nothing to sneeze at.
 

·
Premium Member
Joined
·
8,513 Posts
P365XL Spectre Comp Slide Assemblies Available from SIG Sauer
You asked and SIG has listened. SIG Sauer has just announced the standalone availability of the SIG P365XL Spectre Comp slide. Along with the P365X Empire Katana Mag Funnel, the Spectre Comp Slide assemblies can now be purchased by themselves and added to your own P365XL grip module and FCU without needing to purchase the full P365 XL Spectre Comp pistol.

Trigger Air gun Gun barrel Font Revolver


Toy Lego Auto part Brick Cylinder

 

·
Glockin’ since 1993
Joined
·
47,526 Posts
Discussion Starter · #820 ·
The Recover Tactical P-IX thing is not for me. If I am going to carry an AR, it would be a true AR.
And for a pistol caliber carbine, imho, there are better choices out there.
I’m seeing mixed reviews. Just a different Glock option to the chassis systems out there.
 
801 - 820 of 862 Posts
Top