Glock Firearms banner
501 - 520 of 536 Posts

·
Happy Member :)
Joined
·
5,216 Posts
No. There’s a comment period going on right now. They’re wanting to make them SBR’s! If them and the Dems get their way all AR and AK pistols with a brace will be NFA registered.
Is the brace comment period still open? I thought closed a few days ago unless it was the reciever comment period that closed
 

·
Premium Member
Joined
·
4,539 Posts
Is the brace comment period still open? I thought closed a few days ago unless it was the reciever comment period that closed
I thought it closed on August 19th (?)
 
  • Like
Reactions: SJ 40

·
Registered
Joined
·
3,609 Posts
I thought it closed on August 19th (?)
The 19 th. the receiver home built rule closed, the Brace rule comment period is still open for comment and is set to close on September 8, 2021.
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #505 ·
LONE WOLF DISTRIBUTORS
LONE WOLF ELIMIN8R .45
The Elimin8r .45 is the newest addition to a growing Lone Wolf product line. The Elimin8r .45 features a lightweight, modular design with 8 baffles that are easily configured to your desired length.
It’s rated for practically every pistol caliber and for full auto. The O-rings on each baffle allow for ease of assembly or disassembly and ensure a tight fit while sending rounds down range.
We designed this to be compatible with a variety of existing parts from other popular suppressor manufacturers, so no chance of not finding the parts you need!
ELIMIN8R .45
LONE WOLF ELIMIN8R .45 FEATURES
Modular design with 8 baffles
O-Rings for ease of assembly and disassembly
Rated for full-auto shooting
Compatible with multiple popular pistons (SilencerCo, Rugged, Griffin)

ELIMIN8R .45 Baffles
LONE WOLF ELIMIN8R .45 SPECS
Weight: 10.1oz (measured with .578-28 piston)
Length: 8.45in
Diameter: 1.375in
Caliber Rating: up to 10mm (includes .300BLK subsonic)
Finish: Anodized black
Build Material: 17-4, 7075 Al
MSRP: $599.95
BUT WAIT, THERE'S MORE!
We will have a full line of suppressor accessories including pistons, thread adapters and fixed barrel spacers!
Lone Wolf Suppressors
Visit LoneWolfDist.com to order your ELIMIN8R .45 today!
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #506 ·
Pretty cool!
From SSD:
Matador Arms Announces the Montgo-9 Monolithic Blowback 9mm Upper Receiver

Matador Arms has announced the Montgo-9: a monolithic blowback-operated billet 9mm upper receiver that does not require an AR15 type buffer and buffer tube. Instead, it uses a blowback system with an internal buffer reminiscent of the AR18 (q.v.).

Manufactured in the USA, the Montgo-9 is compatible with any AR-15 and/or AR-9 lower, providing shooters with endless build possibilities while being compact and versatile.
The current version of the Montgo-9 is the “K” version, featuring a 5.5” barrel threaded to 1/2×28”. The back cap shows that no buffer is required, allowing for many compact options. In addition, the non-reciprocating charging handle is reversible. The Montgo-9 has a total length integral Picatinny rail on top and a 3.5” bottom accessory rail.

The Montgo-9 upper receiver is made of aluminum, and the bolt and trunnion are 4140 steel for durability. Weight is 3.5lbs with an OAL of 12.125” and a 1.47” width.

The Montgo-9 adds to Matador’s 9mm product offering. Matador recently announced their AR-9 80% billet lower receivers, the first run of which is shipping mid-September. Matador already manufactures the Mag-X, a mag block adapter enabling the use of P320, Glock, M&P, and CZ-75 pistol mags in their AR-15 lowers.

Matador’s Sidewinder is a folding buffer tube adapter that will fold up anything with AR buffer tubes threads WITHOUT a moving buffer inside. And, the adjustable Regulator muzzle brake comes in 9mm, which could top off the Montgo-9 perfectly. That’ll make for a nice little “hideaway” PCC, unless you’re using a drum magor larger styles of extendo.

The Montgo-9 was scheduled to be on display at this year’s NRA show in Houston at booth #4809…now, not so much.
The MSRP of the Montgo-9 is (as of this writing) $549.99.
Shipping of the Montgo-9 is projected for Q4 of this year. To learn more about the Montgo-9, visit www.matadorarms.com for information.
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #507 ·
From TFB:
India Buy 70,000 Off-The-Shelf AKs

India Buy 70,000 Off-The-Shelf AKs

Soldiers of the Rashtriya Rifles, a counter-insurgency force, armed with Romanian PM MD.90 AKs (Indian Army)
Last week Indian media outlets began reporting that an order for as many as 70,000 AK-pattern rifles had been made from Russia’s Kalashnikov Concern. Speculation surrounded the news and many wondered how the order would fit into the larger deal being negotiated between India and Russia for a production license to manufacture an AK-203 variant in India.
It appears, however, that the reported Indian rifle order may be for the more basic AK-103. Director General of Rosoboronexport, Kalashnikov’s parent company, Alexander Mikheev told Russian news service Interfax that a contract had been signed with India for the supply of 70,000 AK-103 assault rifles. Interfax also reported that a batch of AK-15s was shipped to India, which “will be used by special units of a number of Indian states.”

Indian AK-203 (right side)
The order appears to be to fulfil an urgent operational requirement, which has necessitated an immediate off-the-shelf procurement rather than a run of the planned Indian variant of the AK-203, which we have a detailed article on here. The planned Indian service rifle, to be manufactured by Indo-Russian Rifles Private Ltd., is an amalgamation of features from the AK-103 and AK-203. The Indian rifle plans to retain the 203’s railed top cover, contoured ergonomic pistol grip and its muzzle device. However, India has not opted for the Russian 203’s adjustable buttstock, instead opting for the simpler AK-103 folding stock and handguard (with no top rail).
Russia’s largest military exposition, Army 2021, typically sees major announcements made by numerous state-owned Russian defense companies. Rosoboronexport JSC (part of the Rostec State Corporation) which owns Kalashnikov said in a press release that they would “hold dozens of negotiations and conclude contracts with foreign customers at Army 2021.” Mikheev went on to say “we will showcase equipment and weapons for the land forces, aircraft, advanced precision guided weapons for them, air defense and electronic warfare assets. There are a lot of applications for the demonstration of naval equipment, to which a separate cluster is dedicated at Army this year.” It remains to be seen if the deal for 70,000 rifles will be announced alongside the finalisation of the larger Indo-Russian Rifles Ltd. deal.

AK203 announcement
Prime Minister Modi launches Kalashnikov rifles manufacturing facility in Amethi, underneath a giant image of a 5.56 chambered AK200 series rifle which appears to have been flipped as the ejection port is on the wrong side (PTI)

The off-the-shelf order is contrary to India’s Atmanirbhar (made in India) initiative but is in-line with other Indian urgent procurements such as the high profile purchases of SIG Sauer 716i rifles and Negev Light Machine Guns. The Indian Army requires a total of around 700,000 rifles to replace the current INSAS rifle in front line units. For more context last year we attempted to make sense of India’s small arms procurement efforts.
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #508 ·
From TFB:
Diamondback Firearms Introduces the DB Sidekick Revolver

Diamondback Sidekick (Diamondback Firearms)
Florida-based Diamondback Firearms have announced the introduction of the Sidekick, a new 9-shot single and double action rimfire revolver. The Colt Single Action Army-styled Sidekick has a 4.5″ barrel, a smooth black Cerakote finish, and checkered polymer grip panels. The pistol will be available in November and has an MSRP of $320.
Diamondback Sidekick (Diamondback Firearms)
Diamondback Sidekick (Diamondback Firearms)
Here’s what Diamondback Firearms have to say about the DB Sidekick
(Cocoa, FL) – Diamondback Firearms, creator of high-quality firearms and industry-leading components, is excited to introduce the Diamondback Sidekick, a 9-shot, single and double action rim-fire revolver with a swing out, interchangeable cylinder.
The Sidekick has a 9-round revolving chamber capacity in both calibers and both cylinders are on a quickly convertible swing out arm for fast interchangeability allowing the user to switch between standard and magnum power in just seconds and even faster ejection and reloading, which is sure to excite even today’s modern shooters.
The DB Sidekick hits the mark when it comes to combining the all-time sought-after classic cowboy style featuring all your favorite attributes of a modern revolver. The Sidekick is chambered in 22LR with a 9-shot cylinder and comes with an additional 9-shot cylinder chambered in 22Mag, allowing the buyer to enjoy a firearm that is great for self-defense with manageable recoil, hunting small game, pest control, as well as some enjoyable and inexpensive target practice. The Sidekick higher capacity allows for 3 more snakes, rabbits, or soda cans depending on what you’re hunting.
The Sidekick has a 9-round revolving chamber capacity in both calibers and weighs 32.5 ounces. Both cylinders are on a quick-convertible swing-out arm for fast interchangeability allowing the user to switch between standard and magnum power in just seconds, additionally offering faster ejection and reloading, which is sure to excite shooters.
While the Sidekick models an old school cowboy revolver keeping with that classic look and feel, Diamondback has added features like the cylinder release being incorporated to the old school ejection rod, a cool smooth black Cerakote finish, and checkered polymer grip panels. They also went with a rear integral and a fixed front blade sight. These features are wildly important when you need to be quick on the draw. The Sidekick will initially be offered with a 4.5” barrel having 1:16RH twist, 6 groove rifling. This package weighs in at 32.5 ounces and has an overall length of 9.875.
“Diamondback Firearms cut their teeth in the industry by producing their ultra-compacts DB380 and DB9 pistols and are also well known for their high-quality AR-15 rifles,” says Rachel Maitlitz, Marketing Manager for Diamondback America. “This year, we are working hard to expand our product line and bring new designs to the market. The DB Sidekick is the latest product in the Diamondback lineup and helps expand Diamondback’s product offerings into new areas.”
With a budget friendly MSRP of just $320, the Sidekick (model DBSK22LMB) is sure to be a popular choice for first-time owners and firearms enthusiast alike. Diamondback will officially launch the Sidekick on November 22, 2021. Fans can check the official countdown clock as well as a collection of new Sidekick photos on the Diamondback homepage at www.diamondbackfirearms.com.

Diamondback Sidekick (Diamondback Firearms)
Here are the specs for the Sidekick:
  • Caliber: 22LR / 22Mag Convertible.
  • Action: Single & Double.
  • Grips: Checkered glass filled Nylon.
  • Capacity: 9 rounds.
  • Front Sight: Blade.
  • Rear Sight: Integral.
  • Barrel length: 4.5”.
  • Overall Length: 9.875”.
  • Frame & Handle Material: Zinc.
  • Frame & Handle Finish: Black Cerakote.
  • Weight: 32.5 oz.
  • Twist:1:16 RH.
  • Grooves: 6
For more information about Diamondback Firearms, visit www.diamondbackfirearms.com.
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #509 ·
From SSD:
Federal Ammunition Announces Its New “High Over All” Shotshell Product Line for Competitive Shooters

ANOKA, Minnesota – August 24, 2021 – Federal Ammunition is proud to announce its new Federal Premium High Over All (HOA) shotshell product line. HOA offers competitive shooters the best plastic shotshell product on the market. The product has been featured at regional and national events and will be showcased again at the Minnesota HOA State Championship Shoot held at Minnesota Horse and Hunt Club in Prior Lake, Minnesota, August 27-29.

“We are excited to build on the great momentum of this new product line. Competition shooters have been asking for a new competition load from Federal—and we’ve delivered with the best ever. ” said Jason Vanderbrink, Federal Ammunition’s President. “Top shoots across the country have been buzzing about our new HOA product and we look forward to rolling it out over the next months leading up to the National Sporting Clays Tournament in Texas.
Federal Premium High Over All leaves a trail of shattered targets in its wake and more reloads per shell. It’s hard, high-antimony lead payload and exclusive one-piece Podium wad produce the most consistent patterns, while the solid brass head and tapered, one-piece hull make reloading easier than ever. From beginners to elite and all shooters in-between, it’s the ultimate load for anyone wanting to knock more clay targets at the range. The complete list of sixteen 12-gauge, 2 3/4-inch offerings have a wide range of payloads, velocity, dram and shot sizes to accommodate the needs of any discipline of competitive shooting. A full line up of sub-gauge offerings is set to follow in 2022.
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #511 ·
From SSD:
Dead Air Armament Goes Multi-Purpose With The Primal

For Immediate Release – Kamas, UT – The industry leader in firearms sound suppressors, Dead Air Armament is pleased to announce the addition of the .46 caliber, magnum rated Primal suppressor.

The Primal is a multi-purpose .46 caliber “Rifle Centric” suppressor that is optimized for cartridges like the .458 Socom, 45-70, 450 Bushmaster, yet versatile enough to be effective on sub-caliber handguns. Rated to handle the extreme pressures produced by large magnums like the 338 Lapua, the Primal is tough and at 16.5 oz it’s not overly heavy. As a true multi-purpose suppressor, the Primal can accept the SD500 booster assembly making it usable as a handgun silencer and can be configured to mount with direct thread, KeyMo, Xeno, or 3-lug.

The Primal is constructed with 17-4 Stainless Steel for a high strength to weight ratio, low maintenance, and stress free experience. The Primal body is coated with a high heat cerakote with a mount / endcap that have a Nitride treatment for lifelong durability.
“One challenge to creating a multi-purpose suppressor that does everything well, is the balance of weight, strength, and sound suppression. We call the Primal “rifle centric” because the strength and weight balance is leaning towards rifle level performance but don’t hesitate to put this on your favorite pistol. This thing will eat up anything you throw at it”
Said Mike Pappas, Founder Dead Air Silencers

PRODUCT DETAIL:
Caliber: .46
Length: 7.9”
Diameter: 1.618
Weight: 16.5 oz
Material:17-4 Stainless
Coating: High Temp Cerakote with Nitride mount and endcap
SHIPS WITH:
-LT302 5/8-24 thread insert
-SD502 HUB To P-SERIES thread adapter
-TL Pack wrenches
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #512 ·
From SSD:
H&K Is Bringing The SL8 Back To The USA


Originally introduced to the US market in 1998, the SL8 is a version of the G36 but was discontinued tied in 2010. This latest version is all Black in color with a Red H&K logo on the stock. It features a cold-hammer forged barrel with a recessed crown. The free-floating bull barrel is manufactured with HK cannon grade steel. The G36/SL8 short-stroke gas piston, also featured in the HK416, ensures smooth, clean, reliable operation. The SL8 also features a short MIL-SPEC optics mount, match trigger, and an adjustable stock.

hk-usa.com/hk-models/sl8
Color me shocked! With the rerelease of the MP-5 variants I expected a price tag around $3K.
Air gun Trigger Gun barrel Machine gun Font
Font Screenshot Number Terrestrial plant Document

I am not a HK fanboy but this seems to show HK is somewhat listening to their fan base.

Now if they could only come out with an improved P7/13 with a sub $1K price tag.🙏🏻
 

·
Premium Member
Joined
·
13,652 Posts
Color me shocked! With the rerelease of the MP-5 variants I expected a price tag around $3K.
View attachment 255252 View attachment 255253
I am not a HK fanboy but this seems to show HK is somewhat listening to their fan base.

Now if they could only come out with an improved P7/13 with a sub $1K price tag.
Air gun Trigger Line Gun barrel Gun accessory

Google Pic

I passed on one of these for half the going value, because proprietary magazines. They look cool, but you must really love HK rifles to buy them.
 

·
Happy Member :)
Joined
·
5,216 Posts
Color me shocked! With the rerelease of the MP-5 variants I expected a price tag around $3K.
View attachment 255252 View attachment 255253
I am not a HK fanboy but this seems to show HK is somewhat listening to their fan base.

Now if they could only come out with an improved P7/13 with a sub $1K price tag.
Need them to release the g36/g36c here, that's probably the one h&k I'd sell off some of my collection for. Call of duty made me fanboy that firearm lol
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #518 ·
From SSD:
GOOD NEWS!!!
SAR USA Now Offering Premium Ammunition to US Market
August 27th, 2021

Miami FL.- August 25, 2021 – SAR USA by Sarsilmaz, one of the world’s largest manufacturers of premium firearms and ammunition, is proud to announce that they are now offering their NATO-inspired 9mm pistol ammunition to the US market. Sarsilmaz merges the latest in cartridge innovation, design and technology along with their Old-World heritage and craftsmanship to deliver the finest in sport shooting, hunting, competition, defense and training ammunition.

“This is an incredible opportunity to bring high-quality ammunition to new SAR firearm owners and a market desperate for it,” said Todd Pearson, COO for SAR USA. “SAR ammunition is designed, engineered and manufactured to perform to the highest standards. This ammunition is the perfect complement to the rigorously tested and award-winning SAR pistol lines. This is another high-quality product offed by SAR USA.”
SAR 9mm NATO full metal jacket ammunition is made in Turkey to the highest quality standards and the tightest tolerances. It was designed, built and tested for the uncompromising shooter. This premium ammunition features brass casings and military-grade sealed primers. Made from the finest components, this ammo delivers incredible accuracy and outstanding downrange performance, every time you pull the trigger.
SAR 9mm ammunition is available in 50 round boxes in either 115 grain FMJ or 124 grain FMJ.
Features include:
• Full Metal Jacket Projectile
• Brass Casing
• Weather Sealed Boxer Primer
SAR ammunition is built in their state-of-the-art manufacturing facility that is considered one of the world’s finest. This modern marvel of a factory utilizes the latest technology available today and manufactures the highest quality products anywhere.
Continuous investments into R&D, technologically advanced equipment and expanding product lines have resulted in SAR’s ability to produce world class products. They produce ammunition, pistols and shotguns for customers spanning 78 countries, including the Turkish military, NATO and law enforcement around the world.
Contact your local dealer for availability.
To learn more about SAR ammunition or the complete product line from SAR USA by Sarsilmaz, please visit: www.sarusa.com or follow us on Facebook www.facebook.com/sarusaofficial
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #519 ·
Something for our hand loaders!
From SSD:
RCBS ChargeMaster Link with Bluetooth Delivers Hands-Free Reloading


OVERLAND PARK, Kan. – August 25, 2021 – RCBS®, the leading manufacturer of ammunition reloading equipment for rifles and pistols, has announced the introduction of the new ChargeMaster™ Link powder dispenser. The Link is built off the rock-solid load cell and electronics found in the popular RCBS ChargeMaster Lite, but now offers best-in-class Bluetooth® technology to make reloading easier than ever.
The RCBS ChargeMaster Link’s Bluetooth capabilities give the discerning hand-loader the ability to run the entire unit from their smartphone using the free, newly redesigned RCBS app. This not only allows a user to save custom loads on the app, but to run the machine more quickly and efficiently. Hands-free operation with the app also means a reloader never has to touch the dispenser during the weighing process, ensuring more accurate readings.
“The Link is the perfect dispenser for the budget conscious handloader that is looking for a dispenser that is going to deliver consistent powder charges each and every time but does not need all of the additional features that our other models provide,” said Will Hemeyer, Sr. Product Manager for RCBS. “We take great pride in producing the highest quality dispensers on the market and know the ChargeMaster Link will deliver more consistency than the competition.”
The ChargeMaster Link boasts 0.1-grain accuracy and a 2000-grain load cell capacity. The unit can run on an external battery, meaning reloaders can operate it at home or in the field without being tied to power cords. The unit also features a universal four country CE approved power supply and LCD display with intuitive push-button controls.
ChargeMaster Link has an MSRP of $349.95. For more information or to view other RCBS reloading products, visit RCBS.com.
 

·
Glockin’ since 1993
Joined
·
40,951 Posts
Discussion Starter · #520 ·
From SSD:
Maxim Defense Has Cases of 7.62 x 39 Ready to Ship

Maxim Defense, the premiere manufacturer in PDW technologies, has a large amount of Yugoslavian 7.62 x 39 FMJ and 7.62 x 39 TUI in stock and ready to ship. This won’t help us in the long run with the ban. That’ll take litigation and legislation to handle that. However, it will allow you to keep your long gun (or short gun, for that matter) fed in the interim.

As of this announcement, the Yugoslav ammunition is retailing for $695 per case of 1120 rounds or roughly 62 cents ($0.62) per round. Cartridges are 124gr annealed brass case 7.62 x 39mm FMJ with a Berdan primer. They ship mounted on SKS stripper clips. Buyers keep the case. And the brass, too, Maxim Defense would humbly suggest. If you don’t reload, someone you know almost certainly does.

If that particular type 7.62×39 doesn’t suit, Maxim Defense also offers its own ammunition: the “TUI” (Tumble On Impact) line. TUI ammunition is a solid copper spun line design explicitly designed for short barrels in mind. They’ll handle light recoil with no sacrifice in velocity, and because of the solid copper construction, they can be used wherever lead projectiles are prohibited for sport shooting. The Maxim Defense TUI SBR ammunition is 117gr SCS and ships 20/box.

Bullet TypeM67 FMJ
Caliber7.62X39MM
CasingANNEALED BRASS CASE BERDAN PRIMED
Grain Weight124 GRAIN
Muzzle Velocity (FPS)2402
Rounds Per Box1120
Rounds1120 ROUNDS
Grain Weight Ranges120 – 139
On top of the multiple versions of 7.62×39, they carry plenty of types of ammunition, including 5.56 and .300 Blackout. If you’re in the market for more, take a look at the ammunition section of their website.


Find reviews of Maxim Defense ammunition on the REFT blog or Small Arms Defense Journal.
About Maxim Defense
Maxim Defense is a development company aiming to provide the Military and First Responders the next generation of tools and equipment to succeed in today’s most extreme environments. The company primarily engages in small arms manufacturing focusing R&D on producing better, lighter, and more reliable weapons and accessories. As an industrial-design-centered organization, Maxim seeks to improve and enhance existing weapons platforms alongside developing cutting-edge technologies for redefining the future. Maxim Defense is headquartered in St. Cloud, MN. To learn more, please visit www.maximdefense.com and follow us on Instagram, Facebook, or Twitter @maximdefense.

———————————————-
I’ve heard the Yugo 7.62 is corrosive but can’t confirm at this time.
 
501 - 520 of 536 Posts
Top