[Dons86]

Anyone know of a company that makes a radiused plug that rounds off the bottom of the grip? I have bear paws, and the squared end of the 23 is super uncomfortable after 50 shots or so, starts to wear on my palm, which is a good inch wider than the grip, any sugg's I'd appreciate!

 

[Mike P]

I've got plugs in my Gen4's but I'm not exactly clear on what you're asking. Mine are rounded a little towards the rear of the grip and rounded off sort of acting like a magwell on the front.

 

[Mike P]

Mine is from Glockmeister. Is this what you're wanting?

 

[PUNISHER]

What is the point of the plug? What does it do or prevent?

 

[Mike P]

What is the point of the plug? What does it do or prevent?

Mainly, aesthetics but it will keep outside debris from getting in there while others will argue until they are blue that you shouldn't put one in there because it's supposed to be a "debris channel" so brass fillings and powder residue from the firing chamber can escape. Mine has been plugged for over 7000 rounds and it's no more dirty from firing than it was new.

Of course you have somewhat of a comfort thing like the OP is asking here.

 

[iGlock]

Had them in all my glocks. Plus it looks nice.

 

[PUNISHER]

Mainly, aesthetics but it will keep outside debris from getting in there while others will argue until they are blue that you shouldn't put one in there because it's supposed to be a "debris channel" so brass fillings and powder residue from the firing chamber can escape. Mine has been plugged for over 7000 rounds and it's no more dirty from firing than it was new.

Of course you have somewhat of a comfort thing like the OP is asking here.

Thanks for breaking that down.

 

[Dons86]

MikeP, that is exactly what I'm lookin for! Just something to knock the sharpness off the bottom, my palm wraps all the way down and partly under the mag, so anything to cut down the corners will help, it's not painfull or anything, just annoying as all get out! But thanx again Mike, I shall invest in one asap!

 

[Mike P]

Here's a direct link, a measly $7.00.....

http://www.glockmeister.com/Glockme...-Size-Compact-Gen-4-GLOCKS/productinfo/BCIG4/

The only down side of that particular plug on Gen4's is not being able to use any back straps but IMO most of us that have bought into Gen4's did it for the smaller strapless grip. I know I did. I don't know if any other companies offer one that will allow the use of straps.

 

[Dons86]

I actually preffered my 23 strapless also, I tinkered alot with the backstraps, and ended up not using one