I'm looking to upgrade my trigger action. Up front I have to keep the factory Glock trigger as I will be using it in IDPA SSP competition. So connector, springs ect.. are all I can really change. I know there are a lot of kits available, but from what I have seen it seems that the...
Model: Glock 34 gen 5 FS
Trigger pull after replacing the connnector with a DD 3.5lbs
Now it's around 4,4lbs.
After replacing springs with "TTI Ultimate Competition Trigger Spring Pack for Gen 5"
Finally, it's around 2.8lbs
I'll update the thread once I have a chance...
I decided to try one for myself, instead of asking for opinions. Took me less than 5 minutes to change it. Now I will readily admit, it feels "different", but I've been pretty much Glock loyal for 20 years, with very few variations along the way.
With the stock trigger, it's always felt foreign...
Earlier in the week I got back from the range and put over a hundred rounds in the 43, 48 and shield. It was close between the shield and the 48, but with the Shield Arms magazines coming out next month I decided on the 48.
The Shield I was using had a really nice trigger. It was night and day...
I went to the range today, working on trigger control and experienced some interesting behavior from my Glock pistol.
I was working on trigger control -- not fully releasing the trigger with each shot, but firing and then SLOWLY letting the trigger release just until the reset. Then next...
I am selling a lightly used DAT trigger from overwatch precision. The trigger feel is great, but I prefer a trigger with a different shoe.
Price new was $135. I am asking for $70 or best offer.
Location: Houston Texas
(Firearm: 9mm/.40 S&W/.357 Sig (Does not fit Pre-EH G19 or G43), Trigger...
I’m a grandmotherly sort, or so they tell me, I still feel 25 but that person staring out of the mirror each morning is a stranger. Ha! Loving much about my Glock 43... except the trigger. So I’m here to scope stuff out. Thanks for having me.
Hi everyone, first-time poster here.
For starters, my EDC is a Glock 42, I carry +1. Set the round in the chamber and close slide, then insert magazine. I do this religiously in the morning.
I checked my Glock 42 as I was going to bed one night, and noticed that the trigger looked like it had...
NIB trigger shoe, safety and trigger bar (Gen3 bar).
Gunmetal grey shoe, red safety
Ordered the wrong one, tried to get a refund, but they sent me the right one instead...but I had already put another trigger in my G20.
This is a great trigger, I have the same one in my EDC G19 and love it. I...
Hello everybody! While cleaning my Glock 43 I noticed that there were scratches on the trigger bar piece that pushes up on the striker safety plunger. I think the scratches are from when I take the slide off and put it back on. I've added a pic of what I'm talking about. Is anybody elses like that?
I recently 'pulled the trigger' on my first Glock - I chose the 30S. I also joined my first forum, so thanks for having me. I have looked through the forums for quite some time and I am having trouble finding information on parts compatibility for the G30S. Any answers or...
I'm a new member so I hope that I posted this in the right section.
I decided to install the zev tech v4 race connecter as well as the zev competition spring kit on my 19. They are nice but the stock glock trigger safety catches at the beginning of the trigger pull so today I ordered the Apex...
I just bought a Gen4 G19.. Looking to modify or replace just about all the main components.
Has anyone here used the ZEV TECH trigger kits? If so, how did you like it? They have many options for the gen4 g19.
This gun will be for carry and range.
Hey guys, I'm new here and a fairly new Glock owner and figured I would turn to the pros for help. Plus it's about time I join a good Glock forum :)
So I have resently installed a Glock NY1 Trigger Spring in my Gen 4 Glock 17 with a factory 5.5# connector (150 rounds through the gun). I love...
Trigger bar Question
Hello, We'd like to change out the trigger bars in our gen 4 glock 17 & 26 to gen 3 trigger bars. We think the bump may be causing a drag on the trigger.
Changing out to gen 3 might help smooth up the trigger. Plus it looks like a place to wear out the slide...
Which is best for you? The Steyr is favored by most special forces teams.
Type: Double Action
Chamber: 9x19mm Luger/Parabellum
Weight: 845 g empty; 1285 g loaed
Length: 216 mm
Barrel length: 136 mm
Capacity: 18 rounds
The GB is a blowback-operated, gas-retarded blowback semi auto pistol. It...
Hey guys I recently purchase a G19.. I know a lot of people like to swap out the stock 5.5# connector to the 3.5#. Does is it make a huge difference?? I think the standard one is pretty stiff does the lighter one make the pull a lot more fluid and less resistive?