Glock Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 16 Results
  1. Glock Forum
    Hi All, In need of some help here from the experts. New Glock 42, stock with the exception of an extended mag release. Trying to put the slide back on is not going well. The barrel and guide rod are forward of the slide about a 1/4" and the slide is forward on the frame. The guide rod is...
  2. Gunsmithing
    Hello, My firing pin is currently stuck in the "forward" position. It is protruding into the breach. Additionally, the firing pin safety is stuck in the "up" position. I cannot move the firing pin at all. I can barely push the firing pin safety firther up into the slide. I would like to be able...
  3. Glock Forum
    I’m looking for a new slide for my gen 4 Glock 19. Does anyone have experience with either of these slides? Is there a preference towards one over the other? Wondering how the finish holds up on them and how reliable they are.
  4. Glock Forum
    Hi everyone. I’m a new Glock owner and picked up a gen 5 17 a couple of weeks ago. I have about 300 rounds through it and noticed some wear on the inside of the slide. From what I’ve researched this is where the connector interfaces with the slide when the trigger resets. Can anyone tell me if...
  5. Sold/Expired
    Looking to buy a Glock 19 gen 4 slide, factory oem, or mos or any good slide. complete or just the slide. Pm me on what you have for sale.
  6. Sold/Expired
    Hi im looking to buy a complete upper for a Glock 19 gen 4 9mm. Pm on what you have to offer. Best regards Hopii1
  7. Sold/Expired
    I'm located in SoCal, Thanks!
  8. Glock Forum
    I wanted to see if anyone else had a Glock 20SF and whether they ran into these issues below. I was able to find one forum from back in 2011 that someone started that mentioned them. When I picked up the 20SF, I looked under the slide and noticed there was 'wear' or a slight scratch to...
  9. Sold/Expired
    Due to an recent event, my Glock 19 gen4 slide was ruined by a shop. I had to go out and buy a slide replacement: Glock 19 gen4 EXO Talo Edition. But since Glock came through and sent me a replacement slide, this substitute is up for sale. I bought it used off the original owner with a...
  10. Glock Forum
    Admittedly, I'm kind of a newbie. I bought a G17 Gen. 4 in June. Every time I take the slide off (which was very difficult at first, but pretty easy now), something strange happens. The rear of the recoil spring is very slightly dislodged. It's "up" in that second, curved notch, but at least...
  11. Sold/Expired
    Gen 3 Glock 21 complete slide assembly Sold on another site
  12. Gunsmithing
    First I'd like to say hello to the forum community. Unfortunately, my first post starts with a problem... maybe. So, I recently bought a new Gen 4 Glock 30. Test firing date is of June this year. On the pictures I attached you can see that inside the slide there are some scratches caused by the...
  13. Gunsmithing
    Hey guys, I am going to finish my Glock 17 slide in duracoat tactical dark earth. I've never done it before so I am going to test on a pipe first to see how it turns out. One thing I can't really find with absolute certainty...what do I use to scuff up the current finish? I've read scotch pads...
  14. Glock Forum
    Just looking to hear from anyone that has experience with the model 24 and if they can offer an opinion as to how it compares to the model 35... Looks like the model 24's are pretty hard to come by unlike the model 35... I guess I was specifically interested in the model 24 as it not only has...
1-15 of 16 Results