VIEW MY

judgecrater

Gift Premium Subscription To judgecrater

Join Date:

08-22-2012

Last Activity:

07-26-2017 9:00 PM

Likes Given: 12

9 Likes on 7 Posts 

LATEST ACTIVITY

  • Posted in thread: Gen2 21 with old style parts on 07-27-2017 at 12:55 AM
    This post from the Calguns.net Does anyone know what the old Glock recall was about? thread may
    be of interest. regards,Bob :)The black parts were prone to rust in place. Free replacements
    are better...

  • Posted in thread: Connector/spring combo opinions on 03-15-2017 at 03:48 PM
    You will be perfectly fine with a 3.5 connector and a 6lb trigger spring. In my opinion it is
    the best setup.If you don't want to change the trigger spring, get at least the 3.5 connector.
    It makes a ...

  • Posted in thread: Progressive Press Suggestions on 03-12-2017 at 08:18 PM
    Love my Dillon's.I have a 550b and two Square Deals. The SD are fast and inexpensive. Changing
    calibers is not that difficult if you get two tool heads. I have used a friends 650 and it is
    very nice.

  • Posted in thread: Accidental 9mm firing from a 40 on 03-03-2017 at 02:02 AM
    Is it possible for a 9mm to exit the barrel without contacting it?If you chamber a 9mm in a 45,
    the entire cartridge fall out the barrel, brass and all. Don't ask how I know.

  • Posted in thread: Just bought a new G42 - continuous FTF on 02-24-2017 at 02:04 AM
    Get the store credit and buy her a S&W Shield 9mm. The shield 9 is one of the best carry guns
    for folks with small hands. The recoil is no greater than the 380 due to the longer grip and a
    little more...

  • Posted in thread: Fouling on 02-22-2017 at 12:52 AM
    Chore Boy works well on leading. I wrap some of the Chore Boy around and old bore brush and
    scrub to remove lead. From your picture I can not really see the problem. Hard to tell from the
    photos.

  • Posted in thread: $27 trigger job. on 01-07-2017 at 06:58 PM
    I have had good results with spring and connector changes. I have decided not to mess with the
    striker spring.Exactly right. I tried a lighter striker spring and had misfires. Trigger spring
    and conne...

  • Posted in thread: Odd Gen 2 VIN Help on 12-31-2016 at 02:55 PM
    Could you post a picture of the riflings? I have never seen one with them worn away. Glock
    riflings do not look like conventional riflings.

  • Posted in thread: Glock 19 issues, Failure to Feed ... Fire amongst other things on 12-31-2016 at 02:49 PM
    I wish a little more info had been supplied why the ammo was not chambering properly and had
    been critically examined. Was it the shape of the bullet, the length of the bullet? Would the
    failed rounds...

  • Posted in thread: Holsters for Glock19 on 12-25-2016 at 11:01 PM
    I've used a Crossbreed and my experience is that it is very noisy. I also use the Alien Gear
    Cloak Tuck 3.0. It's awesome and very comfortable. I don't know my G19 gen 4 is there most of
    the time.My C...

0 COMMENTS
POST A COMMENT