Glock 19 Gen 3 Mods to solve BTF issue.

Posted | By:  
 0 Comments
  Email
  Print

Let me begin by explaining that my Glock 19 G3 is my second Glock 19 to eject brass in my face at 6:00. I had a G4 do the same and sold it after trying several recommended modifications. I've been told that my grip is not tight enough or all wrong but my other 10 semiautomatics (M&P's, Sigs, Walther, Rugers, Kimber...) all eject properly and the brass doesn't hit me.Not being one to give up easily on a gun with issues, I went all out on my G3 to solve the eject problem and now have an excellent shooter that's highly accurate, shoots 115gr, 124gr, 147gr, +P ...FMJ & JHP's and forcefully ejects at 4:30 every time.Mods which were needed to solve the BTF issue:Wolff 15# Recoil Guide Rod & Spring replaced the factory 17# spring and plastic guide rod. The lighter spring helps eject more forcefully using 115/124 gr. ammo with light range loads. The stainless guide rod keeps the spring in line under force, won't bend and bind like the plastic.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf1-626.jpg


Apex Failure Resistant Extractor for Glock - Gen 3 has a different shaped claw from the factory extractor and is machined from a billet of aerospace grade stainless steel, not MIM like the factory part.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf2-627.jpg



White Sound Defense +20% stainless steel extractor depressor plunger spring places more force on the extractor.


Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf3-628.jpg


Glock 30274 Ejector is recommended by Apex to help solve eject issues.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf4-629.jpg


Spring Load Bearing Glock Item # SP01176 is also recommended by Apex.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf5-630.jpg


In addition to the parts installed to fix the eject problem, I wanted an improved trigger, reset, and other performance enhancements. I always hated the factory plastic trigger and sights, etc., and there are a dizzying number of aftermarket performance parts to choose from.After many hours of reading reviews and watching videos, I decided on the performance and esthetic modifications that I wanted. My Glock 19 now has a butter smooth 3.5# trigger with short reset, but still retains the safety of a carry gun, not a race gun trigger. The big AmeriGlo green front sight is a big improvement as well. I'm shooting fairly tight groups in the bullseye at 21', which for this old man is a big improvement over the stock Glock configuration.Here's the listing of performance mods:Apex Action Enhancement Trigger & Gen 3 Trigger Bar. The shoe is aluminum and configured to shorten takeup, creep and reset.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf6-631.jpg


ZEV Race Connector, v4 lightens the trigger pull.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf7-632.jpg


Wolff STRIKER SPRING RP 4.0 LB also lightens the trigger pull.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf8-633.jpg


Apex Ultimate Safety Plunger smooths the trigger pull and lightens also.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf9-634.jpg


Wolff Reduced Power Striker Safety Block Spring helps the above.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf10-635.jpg


AmeriGlo GL-212-GR-C Glock Tritium Front Sight glows brilliantly and my favorite sights.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf11-636.jpg


Vickers Tango Down Extended Magazine Release helps eject the magazine without changing the position of my shooting hand.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf12-637.jpg


Vickers Tactical Grip Plug/ Takedown Tool is mostly aesthetic but the takedown tool is useful if needed while on the range.Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf13-638.jpg



Tractiongrip rubber grip tape has a nice stipple grippy feel, my favorite grip enhancement vs Talon grip tape.

Glock 19 Gen 3 Mods to solve BTF issue. - Austin - gf14-639.jpg

Posted in
  Email   Print
0 COMMENTS
POST A COMMENT